Neon color 　 with a built-in LED with the ohm (OHM) electric equipment AudioComm wireless earphone walking earphone neck earphone light

White 　 width 145 X height 19 X depth 177mm/HP-W160N, the package number: 1, 　 features 　　◆The road at night embeds LED to the wireless neck earphone housing and neckband with a built-in 　, LED, too. Switch is with ON/OFF and shines in Neon green when I turn it on. It is excellent at visibility even by night.　◆The controller which is available for one 　 & controller type reproduction 　 stop, volume, selection of music skip, incoming reply is a neckband one model. I reduce the burden to a neck by a 　 design of only 51g including an earphone part. ・◆I connect two 　 to 　 with a charge cord of doji*jufuzoku and can be easily charged from home and 　. In correspondence with multi-　, the waiting reputation of two smartphones is possible at the same time. ※It is non-compliant by a model　◆It integrates a magnet into a smart storing earphone by magnet combination and can connect right and left when I do not use it. I control it, and a neck rotation is stylish & clearly cord nokaramario.　◆USB Type-C charge cord is attached　◆The waterproofing class of IPX4-proof; a form, 　 specifications 　 to wait for　◆A power supply: DC5V (USB feeding…USB Type-C input terminal)　◆Built-in battery: Explanation 　 features 　 ● The road at night embeds LED to the wireless neck earphone housing and neckband with a built-in 　, LED, too. Switch is with ON/OFF and shines in Neon green when I turn it on. It is excellent at visibility even by night. ● The controller which is available for one 　 & controller type reproduction 　 stop, volume, selection of music skip, incoming reply is a neckband one model. I reduce the burden to a neck by a 　 design of only 51g including an earphone part. ● I connect two 　 to 　 with a charge cord of doji*jufuzoku and can be easily charged from home and 　. In correspondence with multi-　, the waiting reputation of two smartphones is possible at the same time. ※It is non-compliant by a model ● It integrates a magnet into a smart storing earphone by magnet combination and can connect right and left when I do not use it. I control it, and a neck rotation is stylish & clearly cord nokaramario. ● USB Type-C charge cord is attached ● The waterproofing class of IPX4-proof; form 　 specifications 　 to wait for ■ A power supply: DC5V (USB feeding…USB Type-C input terminal) ■ Built-in battery: Charge-type lithium polymer battery (3.7V 400mAh) ■
Model Code：: Dynamic type diameter 10mm driver ■ Impedance: 32Ω ■ The output sound pressure level 　 sensitivity: 102dB ■ A communication method: Bluetooth standard norm Ver.5.0 ■ A correspondence profile: HFP, A2DP, AVRCP ■ Correspondence codec: SBC, AAC ■ Abnormality method 　 frequency band: GFSK/2.402~2.480GHz ■ Maximum communications distance: Prospect about 10m (Class2) ■ Multi-　: doji*juitodai two ■ Reproduction frequency band: 20Hz~20kHz (A2DP) ■ Microphone-oriented characteristic 　 sensitivity: All directivity /-40dB ■ A charge time: About 3.5 hours (from residual quantity zero to full charge) ■ Uptime: About 48 hours (50% volume), about 12 hours (at the time of LED lighting 50% volume) ■ *jukanojikan: About 60 hours ■ Allowable operating temperature 　 humidity: Temperature…0~40 ℃ 　 humidity…20~80% (you accomplish dew condensation, and be similar) ■ Waterproofing performance: IPX4 (-proof a form to wait for)…Even if hi of the water from any direction stops by if I wait, I do not come under a harmful influence ※I stop at JIS C 0920:2003 ■ External form dimensions: Neckband…Width 145 X height 19 X 177mm in depth earphone simple substance…The width 14 X height 14 X 23mm in depth cord head…About 250mm ■ Mass: About 51 g ■ Accessories: Ear tip (S M L ※ M has been attached to 　), charge cord (for exclusive use of this plane), book, instruction manual